Specs
Quartz 9kw specs
Setup notes and briefing numbers for Quartz 9kw.
Quartz bank load and coverage
The Quartz 9kW specs page sets out the figures needed to plan around this higher-output flash dryer. Use it to confirm power supply, heater coverage and the room needed around the stand.
The Quartz 9kW spec sheet is there to size the dryer against your print station, not to fill space on a file. It should be checked against the board size, the platen layout and the ink deposit so the heated area matches the print you need to gel. On inland sites, airborne lint and dust also matter because quartz banks need regular cleaning to keep heat output even across the panel.
Use the listed dimensions before you mark out the stand position beside the press. Clearance around the head, cable run and operator access should be confirmed before power is brought to the unit. A note with the working height and first test settings is worth keeping near the machine for shift changes.
What the spec page confirms
The figures below are what you need to plan a higher-output flash position on a garment or packaging line. Check the electrical demand, heater face size and overall footprint together, because one number on its own never tells you whether the unit will suit the station. Compare the dryer with your actual press layout and available supply on site.
Before using the contact form, note the line where the Quartz 9kW will be used and its belt width. Include the current flash unit rating, supply details and a photo of the press side if the replacement must fit into an existing gap. That makes it easier to match this quartz bank to the rest of the print setup without guesswork.
- 9kW output planning figures
- Heater face and stand clearance
- Power supply checked before install
South African site conditions
In Johannesburg and other inland plants, dust settles quickly on reflectors and quartz tubes, so cleaning intervals should be part of the planning discussion. Durban and Cape Town sites can bring more moisture into the room, which affects storage conditions around electrical equipment and can change how teams handle warm-up checks at the start of shift. Older industrial units also need a hard look at available amperage before a 9kW flash dryer is added.
Load-shedding and generator use can alter how and when a flash station is tested, especially where several dryers and presses share one distribution board. Measure the space around the stand as it will sit in production, not in an empty bay, because operator movement and pallet access count. For packaging lines, confirm that the heated zone suits the substrate area being flashed rather than assuming a garment setup will translate directly.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
Figures to gather first
Have the site voltage, breaker capacity and the intended press position ready when reviewing Quartz 9kw specs. Add platen size, target print area and any heat-sensitive stock that will pass under the head.
If another flash unit is being replaced, record its rating, heated face size and the issue that pushed the change. Those details help when comparing the new dryer with a project file or purchase paperwork for the next approval step.
What our Flash Dryer customers say
Verified Google reviews