Dryers
Hood Kit
A Hood Kit fits above the heating zone to contain rising heat and give extraction a proper pickup point. On flash units used for garments or packaging, it helps reduce heat drift toward operators, adjacent heads, and nearby electrical items. The option is useful where the press position leaves little space between the dryer and the rest of the line.
Heat capture above the platen
Hood Kit adds extraction or heat management around the dryer where the installation needs better control above the heating area. That can help on print lines where rising heat affects operators, nearby stations, or surrounding equipment. The hood option is intended for real floor use around active print stations.
Before specifying a Hood Kit, note the dryer model, head height, and what sits next to the heating area. Gauteng dust, Durban humidity, and longer summer ambient temperatures can all change how often the hood, duct entry, and surrounding surfaces need inspection. Extraction layout matters just as much as heater output when staff are standing close to the flash position.
Take a straight-on photo of the dryer in its working position, including any nearby print head, cable run, or wall obstruction. That image helps show whether the hood needs extra clearance for opening, cleaning, or maintenance access. It also avoids fitting a heat management option that clashes with the press stroke or operator reach.
What the hood option covers
The hood assembly works as a heat-management add-on for a dryer, not as a stand-alone extraction system. The main aim is to guide heat upward in a controlled way above the active heating area. On busy print lines, that can make the station easier to manage where space is tight and heat builds up over repeated flashes.
Match Hood Kit to the correct dryer width and mounting arrangement before any drawing or parts list is used. Check the surrounding line details again if ducting, guards, or overhead services are close to the unit. Dryer sizing depends on belt width, ink type and the pieces you run per hour, so list those in your message.
- Heat directed above the flash area
- Clearance checked around heads and cables
- Photos showing the full dryer position
Plant conditions that affect hood use
At some SA sites, the dryer sits close to a wall, a carousel arm, or a packaging conveyor, which changes hood access and duct routing. Older industrial buildings around Johannesburg and similar production units elsewhere often have limited overhead room for extraction drops. Where power interruptions are common, rechecking temperatures after restart is worthwhile because trapped heat above the station can behave differently once production resumes.
Coastal installations may need more frequent cleaning where moisture and airborne residue collect around metal surfaces. Inland sites can see dust settle on the hood, brackets, and extraction points, especially if doors stay open through the shift. Regular inspection of fasteners, panels, and any connected ducting helps keep the setup stable during repeated heating cycles.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
Photos and clearances for Hood Kit
Send the dryer type, heater size, and a few site photos that show height above the unit and space on each side. Note whether the concern is operator heat, nearby equipment exposure, or a need to tie into existing extraction. If something has been modified on the press, include that as well so the hood arrangement can be viewed in context.
Useful measurements include the distance from heater top to any overhead obstruction, the width available for the hood body, and where ducting could exit. Add a note on the material being printed and how long the flash stays active during normal runs. Those details make it easier to relate the hood option to the actual print station rather than a generic dryer layout.
What our Flash Dryer customers say
Verified Google reviews