Cure log
Coastal Care
On coastal sites, keep ceramic IR faces, terminals, and control boxes clean and dry to limit salt-air corrosion and uneven heat output.
Coastal shops deal with a different set of heater headaches: salt air on fittings, damp mornings, and corrosion starting where nobody looked last week. Coastal Care is our note for print teams near the coast who run flash and flush dryers in these conditions.
Near the coast, dryer upkeep needs tighter housekeeping around salt and damp air. Use the contact form and say whether the shop is in Durban, George, Cape Town or another sea-facing site. A photo of the heater face, wiring side and control box helps place the corrosion risk correctly.
Coastal checks before line use
- Coastal town and shift noted
- Clear photo of heater face, terminals and cabinet
- Exact dryer type named from the catalogue
- Name, role, branch or print shop included
Read the unit page that matches the heater on your line, then compare it with this cure note. Ceramic IR banks, quartz banks and ScreenMaster-style flash cells do not react the same way when salt residue builds up. Keeping the model and the maintenance note together cuts down confusion around spares and fault checks.
How Coastal Care lands on George Bay print shifts
Coastal Care looks at what salt air does to dryer components near the coast. Keep ceramic IR faces, terminals, and control boxes clean and dry so corrosion does not creep in and upset heat output on the line.
Start with the coast-facing conditions around the press, not only the print itself. Damp mornings, open roller doors, sea air and overnight condensation can affect terminals, reflectors and control boxes before first production starts. Teams in Durban, George and Cape Town often need earlier wipe-down checks than inland sites to keep heat output even across the platen or pack line.
Take the first photo before anyone wipes the unit down. The visible state of the ceramic face, terminal area and cabinet edge can show where salt build-up starts and whether moisture is tracking into fittings. Keep that record with the line note so the next shift does not guess what changed.
What to pin down
Narrow the issue to coastal exposure, heater condition and the exact part of the dryer affected. A short record with the right model name, line note and photo set is more useful than a broad fault description. That keeps the discussion centred on corrosion risk, uneven heat and the checks that belong with coastal running conditions.
Pair Coastal Care with the corresponding line note and a cure log entry before you broaden the scope. Verify the line details again before any unit or spare is sent out from our side. For coastal print rooms, say how close you are to the sea when you write in.
- Coastal risk linked to the actual line
- First-condition photos taken before cleaning
- Present setup picture added to the enquiry
Sea-air factors worth recording
Name the site conditions as plainly as possible. A press line in George Bay, a packaging line near Durban harbour, or a Cape Town unit exposed to wet winter air may show different corrosion points even on similar heaters. If a spare or complete unit is being considered, verify the line details again before anything is sent from our side.
Salt in the air can sit on ceramic IR faces, creep onto terminals and start trouble inside a control box if cleaning is delayed. Moist mornings also change when the first heat check should happen, especially after a shutdown or weekend stop. Record whether the dryer stands near an open door, extractor discharge or wash area, because that changes maintenance intervals.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
Notes to include with Coastal Care
On coastal sites, keep ceramic IR faces, terminals, and control boxes clean and dry to limit salt-air corrosion and uneven heat output.
When you log the issue, note Coastal Care so the record stays tied to coastal conditions rather than a general heater complaint. Add one picture of the present print setup and another of the affected dryer section. Pair this note with the matching line entry and a cure log item before the scope is widened.